Explanation Of Error Messages - Hartmann Veroval Compact BPW 22 Instrucciones De Uso

7. Explanation of error messages

Error that occurred Possible causes
Monitor cannot be Batteries are missing, positioned incorrectly or flat.
switched on
The measuring signals could not be detected at all or
read correctly. This can be caused by applying the cuff
incorrectly, by moving or talking, or by a very weak pulse.
E2
Incorrect measurement due to movement.
E3
The cuff was not applied correctly.
E4
Error during measurement.
E5
Inflation pressure is higher than 300 mmHg.
E6
A system error has occurred.
Remedy
Check batteries. If necessary, replace with two new identical
batteries.
Check that the cuff has been positioned correctly. Do not talk
or move during measurement.
Do not talk or move during measurement.
Check that the cuff has been positioned correctly.
Contact customer service if this error message appears.
Please rest for at least 1 minute, then take the measurement
again.
Contact customer service if this error message appears.
65
English
EN