Setting The Station Times; Master Valve/Pump Start On/Off - Irritrol Total Control Guia Del Usuario

SETTING THE STATION TIMES

A station is assigned to a program when it is given a station time (from 1 minute to 10
hours) in that program. The station can have only one run time per program. Additionally,
the station can be assigned to any number of programs and have a different run time
assigned in each.
To set the run time for each station:
1. Turn the function dial to the
station number 1 and off (or the current station run time).
A B
2. Select Program , ,
NEXT
3. Press the button to select the station number you wish to set (if other than the
one displayed).
+
–
4. Use the and/or buttons to display the desired station run time.
NOTE:
off is the factory setting for each station. If the station has a run time and you
wish to remove it from this program, use the
between 10:00 [ten hours] and 00:01 [one minute]).
5. Repeat steps 3 and 4 to set a run time for each station you wish to assign to the selected
program.
6. Repeat steps 2 through 5 for each program as necessary.

MASTER VALVE/PUMP START ON/OFF

The Total Control enables automatic operation of the Master Valve/Pump Start output
circuit to be controlled independently for each watering program. For example, if a
program is used for drip irrigation and the system pump is not required, the Master Valve/
Pump Start output circuit can be shut off whenever that program begins operation.
The factory setting is on for each program. Use the steps below to select the operation of
this feature for each program as necessary.
1. Turn the function dial to the
A B
2. Select Program , ,
NEXT
3. Press the button repeatedly until master valve is displayed.
OFF ON
4. Press the or
output for the selected program.
5. Repeat steps 2 through 4 for each program as necessary.
Station Times
C D Program
or with the
Station Times
C D
or with the Program switch.
button to display the operation of the master valve/pump start
position. The controller displays
switch.
+
–
and/or buttons to select off, (displayed
position.
11