Irritrol Total Control Guia Del Usuario página 33

Ocultar thumbs Ver también para Total Control:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turn Off f f Watering
Turn Off Watering
1. Set dial to Off/Rain Delay. (After two seconds,
1. Set dial to Off/Rain Delay. (After two seconds,
all watering will stop.)
all watering will stop.)
T o return controller to normal operation, set dial to Run.
T o return controller to normal operation, set dial to Run.
Set Time and Date
Set Time and Date
1. Set dial to Current Time & Date.
1. Set dial to Current Time & Date.
2. T o change, use + and – buttons: press NEXT for next functions:
2. T o change, use + and – buttons: press NEXT for next functions:
hour, minutes, year, month, day.
hour, minutes, year, month, day.
Set Station Watering Time
Set Station Watering Time
1. Select program with Program switch.
1. Select program with Program switch.
2. Set dial to Station Times.
2. Set dial to Station Times.
Controller displays first station's watering time.
Controller displays first station's watering time.
3. T o change, use + and – buttons: press NEXT for next station.
3. T o change, use + and – buttons: press NEXT for next station.
Select Days to Water
Select Days to Water
W W
1. Select program with Program switch.
1. Select program with Program switch.
2. Set dial to Watering Days. Controller displays current watering
2. Set dial to Watering Days. Controller displays current watering
schedule. T o change, use the steps provided for one the following
schedule. T o change, use the steps provided for one the following
options: Specific Days of the Week, Odd or Even days, or Day
options: Specific Days of the Week, Odd or Even days, or Day
Interval.
Interval.
• • Specific Days of the Week
• Specific Days of the Week
a. Press NEXT until the days of the week are displayed.
a. Press NEXT until the days of the week are displayed.
b. Press ON to select weekdays option.
b. Press ON to select weekdays option.
c. For flashing day, press ON to select or OFF to remove from
c. For flashing day, press ON to select or OFF to remove from
schedule.
schedule.
d. Press NEXT.
d. Press NEXT.
e. Repeat step (b) and (c) for each day.
e. Repeat step (b) and (c) for each day.
Guía del usuario del programador
para modelos de 36 y 48 estaciones
Total Control 36 and 48 Station Quick Reference Guide
Total Control 36 and 48 Station Quick Reference Guide
• Odd or Even Days
• • Odd or Even Days
a. Press NEXT until the Odd Days or Even Days option is
a. Press NEXT until the Odd Days or Even Days option is
displayed.
displayed.
b. Press ON to select.
b. Press ON to select.
• Day Interval Watering (1-30 days)
• • Day Interval Watering
W W
a. Press NEXT until the Day Interval option is displayed.
a. Press NEXT until the Day Interval option is displayed.
b. Press ON to select day interval option.
b. Press ON to select day interval option.
c. Press NEXT; controller displays currently programmed day
c. Press NEXT; controller displays currently programmed day
interval.
interval.
d. Use + and – buttons to select day interval watering
d. Use + and – buttons to select day interval watering
(1 to 30 days).
(1 to 30 days).
e. Press NEXT until "Today"
e. Press NEXT until "Today" is displayed.
T T
f. Use + and – buttons to select the desired setting for today.
f. Use + and – buttons to select the desired setting for today.
This allows you to begin the day interval watering cycle at
This allows you to begin the day interval watering cycle at
any time.
any time.
EXAMPLE: T o water every third day starting today, select today
EXAMPLE: T o water every third day starting today, select today
as day 3. T o water every 5
as day 3. T o water every 5 days starting tomorrow, select today
y
days starting tomorrow, select today
as day 4.
as day 4.
Select Program Start Times
Select Program Start Times
1. Select program with Program switch.
1. Select program with Program switch.
2. Set dial to Program Start Times.
2. Set dial to Program Start Times.
3. T o change, use + and – buttons; press NEXT for next start time.
3. T o change, use + and – buttons; press NEXT for next start time.
NOTE: This sets the time to start watering all stations in sequence.
NOTE: This sets the time to start watering all stations in sequence.
T o water more than once per day, use additional start times.
T o water more than once per day, use additional start times.
Total Control
(1-30 days)
is displayed.
Continued
Continued
iii

Publicidad

Tabla de contenido
loading

Tabla de contenido