Simple Troubleshooting: Problems And Remedies - Outils Wolf N34BPE Manual De Instrucciones

G
B
PROBLEMS AND THEIR REMEDIES
Most operating anomalies are due to mishandling or incorrect use of the lawnmower, or
failure to carry out the normal maintenance that we recommend. Below are some simple
ways of identifying malfunctions and correcting them. If the problem persists, we recommend
that you contact your Outils WOLF-approved Specialist (list available on request from Outils
WOLF - 5 rue de l'Industrie - BP 80001 - 67165 WISSEMBOURG CEDEX).
WARNING! Before beginning any work on the lawnmower, switch off the motor and
unplug the power cable.
MALFUNCTION
The lawnmower is noisy
and vibrating a lot
The motor is not running
The lawnmower cuts badly
The grass bag does
not fill properly
78
SIMPLE TROUBLESHOOTING:
PROBABLE CAUSES
The blades have been
damaged by an impact
The blades are loose
There is no power
reaching the motor
The cable is damaged
The blades are blunt
The cutting height is wrong
The blades are worn
The bag canvas is clogged
The cutting height is wrong
REMEDIES
Replace the blades
(original parts)
Tighten the bolts
Check the cable
connection and
the fuses
Take the plug out of
the socket, replace or
have the cable checked
by your Outils WOLF-
approved Specialist
Replace the blades
(original parts)
Correct the cutting
height adjustment
Replace the blades
(original parts)
Clean the grass bag
Correct the cutting
height adjustments