SICE S 58 LL Manual De Instrucciones página 73

If the rim exceeds 44" in the locking point,
insert the extensions available as optional
accessory supplied on request (Fig. 20).
Position the wheel vertically on the machine
surface (Fig. 21).
Use the controls to set the turntable so
that the ends of the clamps just touch the
rim edge.
Then lock the turntable, selecting as the
locking point the area that is as inward as
possible depending on the form of the rim.
- E
- Operator's manual
nGlISH
19
20
21
73