Graco 6211 Manual Del Propietário página 65

10. Now the vehicle seat belt must be tightened.
When tightening the seat belt over the safety seat, make sure there is no
slack on either side of the safety seat or between the vehicle belt hooks
on the safety seat. When tightening the seat belt through the base, make
sure there is no slack on either side of the base or along the base belt
path.
To create a very tight
installation, push down hard
with your knee or free hand in
the middle of the safety seat or
Ê
base and pull and tighten the
vehicle belt.
If you have a lap-only belt,
go to step 11.
If you have a lap/shoulder
combination belt, go to step 12.
46
Ê