Serial Numbers; Product Cleaning - Peg-Perego Primo Viaggio i-Plus Instrucciones De Uso

Removing the soft cover
20 To remove the "Tri Stage Cushion": unbutton the two
buttons (fig_a) anchoring the headrest reducer to the
backrest reducer cushion and pull it off (fig_b). Remove the
headrest reducer from the car seat headrest by pulling out
the two elastic bands at the back (fig_c).
21 Lastly, unfasten the straps and remove the seat reducer
cushion by pulling it off the crotch strap.
22 Remove the shoulder pads (fig_a); open the compartment
on the back of the car seat and pull the straps out the front
(fig_b).
23 Release the four elastic bands on the cover from underneath
the handlebar (fig_a), pull out the crotch strap (fig_b) and
remove the entire cover.
24 Slide off the headrest cover from the bottom first and then,
carefully, over the two sides;
BE CAREFUL NOT TO BREAK POLYSTYRENE (EPS-EPP)
PARTS.
Remove the soft cover in sequence, as shown in the figure.
Maintenance of the padding
Brush the fabric parts to remove dust.
• When washing, closely follow the instructions stated on the
label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
How to cover the car seat
• Proceed to perform the operations shown in figures 20
through 24 in reverse order.
The Original Accessory Peg-Perego
Peg-Perego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product's accessories on
www.pegperego.com

Serial numbers

25 Underneath the side of the car seat you will find the approval
label and another label bearing the following information:
product name, production date and serial number.
26 The date of production appears on the harness.
This information may be of use to customers in the event
of problems with the product.

Product cleaning

• This product requires minimal maintenance. Cleaning and
maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth. Do not
use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device with
solvents or other similar products.
• Protect the product from atmospheric agents: humidity, rain
or snow. Extended exposure to sunshine can cause colour
changes in many materials.
• Store the product in a dry environment.
PEG-PÉREGO S.p.A.
Peg-Pérego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Pérego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
Peg-Pérego after-sales service
If any parts of the item get lost or damaged, only use genuine
Peg-Pérego spare parts. For any repairs, replacements,
information on the products and sales of genuine spare parts
and accessories, contact the Peg-Pérego Assistance Service
and state the serial number of the product, if present.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
All intellectual property rights on the contents of this manual
are property of PEG-PEREGO S.p.A. and are protected by the
laws in force.
22