Maintenance Menu; Configuration Menu; Troubleshooting - Dräger VarioGard Instrucciones De Uso

Troubleshooting

5.2

Maintenance menu

This level delivers information, enables standard settings and the
administration of temporary memory.
Only the menu options indicated can be accessed via the maintenance
password.
5.3

Configuration menu

At this level, individual system parameters can be configured.
The Maintenance and Configuration function groups are accessible
via the configuration password.
Other configuration parameters
Other configuration parameters are accessible only by Dräger Service.
Passwords preset before delivery:
Password for menu » MAINTENANCE «
Password for menu » CONFIGURATION «
36
6
If the measuring range is exceeded:
Display on the central unit e. g.:
If a fault occurs:
The LED (1) on the central unit and
on the transmitter concerned
flashes according to the particular
alarm, see 6.1 on page 37
Display on the central unit in the event of
a warning, e. g.:
1
2 Display on the central unit when a fault
occurs, e. g.:
The alarm relays are switched according
to the particular alarm; see 6.1 on page 37.
Troubleshooting
Transmitter 2
 ppm CO
A4
1
ESC
VarioGard
Transmitter
Comms. interrupted !
Dräger VarioGard
Error EEPROM !
Dräger VarioGard