GB
12 Commissioning
12.2.5 Fixing the temperature setting
In fig. 8, the temperature is to be fixed at 20 °C
as an example. To do this, set the temperature sel-
ector knob fig. 8 (1) to the required fixed room
temperature in fig. 8 to 20 °C. Lift the limiting
springs (19, 20) and engage them next to the
limit stop (18) in the temperature selector dial
(17); then, the temperature selector is fixed to the
set value in fig. 8 to 20 °C.
After each setting,
place the room thermostat to
the mounting plate as described in chap. 11.3,
and set the main switch of the
THERMOcompact/COMBIcompact to "I".
38
The CE labelling documents that the VRC in con-
junction with the Vaillant Directive (Directive
73/23/EEC of the Council) and the tested
model. It also complies with the Austrian safety
regulations.
We assume no liability for damage caused by
non-compliance with these instructions, in particu-
lar for mis-wiring or mechanical damage.