1, 2, 3 Series Of Operations; Setting The Series Of Operations Function; Setting The Time-Setting Options; Timer - Bosch HBC84E653 Instrucciones De Uso

Opening the oven door during cooking
Operation is suspended. After closing the door, press the
button briefly. The programme will then continue.
Pausing operation
Press the button briefly. The oven is paused. Press the
n
button again to continue operation.
n
Changing the cooking time
This can be done at any time. Use the
the cooking time.

1, 2, 3 series of operations

You can use the SeriesOperations function to set up to three
different microwave power settings and times and then start.
Ovenware
Always use microwave-safe, heat-resistant ovenware.

Setting the Series of operations function

Set a cooking time for each operation in the series.
Set the function selector to
1.
Press the button.
2
2.
The ª for the first operation in the series appears on the
display.
Set the first microwave power setting and cooking time.
3.
Press the 2 button.
4.
The for the second operation in the series appears.
«
Set the second microwave power setting and cooking time.
5.
Press the button.
2
6.
The ¬ for the third operation in the series appears.
Set the third microwave power setting and cooking time.
7.
Press the button.
n
8.
Operation starts. The total cooking time appears.

Setting the time-setting options

Your oven has various time-setting options. You can use the
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The brackets [ ] show you which time-setting option
you have currently selected. A time-setting option which has
already been set can be changed directly with the
button when the relevant time symbol is in brackets.

Timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
Press the 0 button once.
1.
The time symbols light up in the display and the brackets are
around .
U
Use the @ or A button to set the timer duration.
2.
Default value for button = 10 minutes
@
Default value for button = 5 minutes
A
After a few seconds, the time setting is adopted. The timer
starts. The [ ] symbol lights up in the display and the timer
U
duration counts down. The other time symbols go out.
or button to change
@ A
.
Ý
or
@
Changing the microwave power setting
Press the button for the new microwave power setting. Use
n
the or button to set the cooking time and restart the
@ A
microwave.
Cancelling operation
Press and hold the
turn the function selector and temperature selector back to the
off position.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
Changing the setting
Changes can only be made before operation begins. Press the
button repeatedly until the number for the series of
2
operations appears. Change the setting.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
button briefly. The programme will then continue.
Pausing operation
Press the button briefly. The oven is paused. Press the
n
button again to continue operation.
n
Cancelling operation
Press and hold the
turn the function selector to the off position.
Checking the cooking time
Press the button twice.
0
Note: You can also combine a type of heating with the Series of
operations function. Set the type of heating first.
0 The timer duration has elapsed
A signal sounds. 00:00 is shown in the display. Use the
button to switch off the timer.
Changing the timer duration
A
Use the or
@ A
seconds, the change is adopted.
Clearing the timer period
Use the button to reset the Timer duration to as far as 0:00.
A
The change will be adopted after a few seconds. The Timer is
switched off.
Checking time settings
If several time-setting options have been set, the corresponding
symbols appear on the display. The timer counts down in the
foreground. The
seen counting down.
To check the Timer
the 0 button repeatedly until the brackets are around the
relevant symbol. The value is shown for a few seconds on the
display.
button for approximately 4 seconds or
n
0
button for approximately 4 seconds or
n
button to change the timer duration. After a few
symbol is in brackets and the timer can be
U
U , Cooking time r or Clock
button.
n
0
0 , press
9