Alarm Indicator And Sounds - ECOVACS Deebot M8 Manual De Instrucciones

3. Operating and Programming

3.7 Alarm Indicator and Sounds

If the robot detects a problem, it emits an alarm sound and the AUTO Mode Button flashes
RED. Please troubleshoot according to the alarm sounds.
Alarm Sound
One Beep
Two Beeps
Three Beeps
Four Beeps
Five Beeps
Six Beeps
Seven Beeps
18
EN
Problems
Driving Wheel Malfunction
Main Brush Malfunction
Driving Wheel Malfunction
Dust Bin Malfunction
Low Battery
Side Brush Malfunction
Anti-Drop Sensor
Malfunction
Solution
Check Driving Wheels for tangled hair or
debris and clean.
Check Main Brush for tangled hair or
debris and clean.
Turn over the robot. Press Driving
Wheels to check for a clicking sound.
If they do not click, please contact
Customer Service.
Remove the Dust Bin and re-install it
properly. If the robot still emits the alarm,
please contact Customer Service.
Manually place the robot on the Charging
Dock to charge.
Check Side Brush for tangled hair or
debris and clean.
Check Anti-Drop Sensors for dust and
clean.