Putting Detergent Into The Machine; Running Your Machine; Select The Washing Cycle; Auxiliary Functions - Becken BWM3215 Manual De Instrucciones

2.2.2.3. Putting Detergent into the Machine

The quantity of detergent used depends on the following criteria:
• Detergent depends on how dirty the laundry is. Laundry which is only slightly dirty does not need pre-washing and
only needs a small amount of detergent in the second compartment of the detergent drawer.
• If the laundry is very dirty, choose a washing cycle with a pre-wash and put ¼ of the detergent you use into the
first compartment of the detergent drawer and the remaining ¾ in the second compartment.
• Use machine-washing detergents. The amount of detergent to be used is indicated on the packaging.
• The harder your water supply, the more detergent will be needed.
• The amount of detergent needed increases proportionally to the amount of laundry.
• Place fabric softener in the fabric softener compartment of the detergent drawer. Do not exceed the MAX level or
the fabric softener will overflow into the washing water through the inlet hose.
• Concentrated fabric softeners should be diluted before being placed in the compartment. Concentrated fabric
softeners can clog the outlet and block the flow of fabric softener into the machine.
• Liquid detergents can be used for all washing cycles without a pre-wash. Use the liquid detergent cartridge from
the accessory bag or in the drawer* and place it in the second compartment of the detergent drawer. Use the
quantities indicated on the cartridge. Remember to remove the liquid cartridge after use.
* The machine specifications may vary depending on the product.

2.2.2.4. Running your Machine

• Switch your machine on.
• Open the water faucet.
• Open the machine door.
• Spread the laundry in the drum.
• Push the door shut until you hear the lock click.

2.2.2.4.1. Select the Washing Cycle

Select the most suitable cycle for your laundry from the cycle table.

2.2.2.4.2. Auxiliary Functions

Before starting the washing cycle, you can select an auxiliary function.
• Press the button for the auxiliary function you want to use.
• If the auxiliary function symbol on the electronic display
lights, the function you selected has been activated.
• If the auxiliary function symbol on the electronic display
flashes, the auxiliary function you selected will be de-
activated.
16