Using The Product; Installing The Machine - Becken BWM3215 Manual De Instrucciones

2.2. Using the Product

Before using the product
1- Removing the packaging:
The packaging protects the machine from damage during transport. The packaging material is recyclable and therefore
environmentally friendly.
Recyclable materials save raw materials and reduce waste.
2- Disposing of your old machine:
Old electric and electronic appliances may contain reusable parts. This is why you should not dispose of these
appliances with household waste.
Make sure the parts of your old electric and electronic appliances are reused by disposing of them at authorized waste
recycling centers.
Before taking old appliances to a recycling center, make sure they are stored in a suitable location out of the reach of
children.
Savings tips
Here are some tips to get more efficient use of your machine:
• The amount of laundry that you put in your washing machine must not exceed the maximum indicated quantity.
• This means that the machine will run as economically as possible.
• Not using the pre-wash function for small loads or normally dirty laundry will save electricity and water.

2.2.1. Installing the Machine

Before using the washing machine, remove the 4 transport bolts and rubber spacers located at the back of the machine.
If the bolts are not removed, they will cause strong vibrations, noise and damage to the product (voiding the warranty).
Loosen the transport bolts by turning them anticlockwise using a suitable wrench.
When loose, pull the transport bolts out.
Insert the caps from the accessory bag to cover the holes left by the removal of the transport bolts.
Keep the transport bolts as you will need them in the future if you transport your machine.
NOTE:
It is imperative to remove the transport bolts from the machine before using it for the first time. Machines that suffer
damage because they have been used with the transport bolts still in place are not covered by the warranty.
8