Half Load Detection System; Auxiliary Laundry Functions; Temperature Selection; Selecting The Spin Speed - Becken BWM3215 Manual De Instrucciones

The functions may not be activated because:
• The function you want to use is not available for the washing cycle you selected.
• Your washing cycle has already gone further than the phase in which the function would be used.
• The function you want is not compatible with another function you already selected.

2.2.2.4.3. Half Load Detection System

Your machine has a half load detection system.
If the laundry load is half or less than half your machine's maximum capacity, for certain washing cycles the machine
will run to save washing time, water and energy consumption. When the half load function is activated, the machine
will complete the washing cycle you defined, but in a shorter time.

2.2.2.5. Auxiliary Laundry Functions

2.2.2.5.1. Temperature Selection

The washing cycle temperature can be selected using the temperature setting button.
When you choose a new washing cycle, the maximum temperature for the cycle is
shown on the temperature display.
You can reduce the washing cycle temperature from the originally displayed value
down to cold (- - C) by pressing the temperature setting button.
If you overshoot the temperature you want, press the temperature setting button and
keep it pressed until the temperature you want is displayed.

2.2.2.5.2. Selecting the Spin Speed

You can set the spin speed for your washing cycle.
When you choose a new washing cycle, its maximum spin speed is shown on the spin
speed display.
You can reduce the spin speed down to zero (- -) and up to the maximum washing
cycle spin speed, by pressing the spin speed setting button.
If you overshoot the spin speed setting you want, you can reset the spin speed by
keeping the spin speed setting button pressed.
Washing Machine | Lavadora | Máquina de Lavar Roupa
EN
17