Technical Specifications - Becken BWM3215 Manual De Instrucciones

2.4.1. Automatic Malfunction Warnings and What to Do
Your machine is equipped with systems that have the capability of both taking necessary preventive action and warning
you of any malfunction by continually self-testing during washing cycles.
ERROR CODE
E1
E2
E3
E4
* See the chapter on machine maintenance and cleaning.

3. TECHNICAL SPECIFICATIONS

Operating voltage/frequency (V/Hz)
Total current (A)
Water pressure (Mpa)
Total power (W)
Maximum dry laundry capacity (kg)
Spin speed (rpm)
Number of washing cycles
Dimensions
(Height x Length x Depth) (mm)
30
POSSIBLE MALFUNCTION
Your machine door has been left
open.
The water pressure or water level
inside the machine is low.
The pump is malfunctioning, the
pump filter is clogged, or the pump's
power supply is faulty.
Your machine contains too much
water.
220-240 V/50 Hz
10
Maximum: 1 Mpa
Minimum: 0.1 Mpa
2200
7
1200
15
845 x 597 x 527
WHAT TO DO
Close the machine door. If the
machine continues to
a malfunction, switch it off and
immediately contact your nearest
authorized customer service.
Open the faucet.
The water supply may have been cut
off. If the problem continues, your
machine will stop automatically after
a while. Switch off the machine, close
the faucet and contact your nearest
authorized customer service.
Clean the pump filter. If the problem
persists, contact the
authorized customer service.*
Your machine drains by itself. Switch
the machine off during the draining
operation. Close the faucet and
contact the nearest authorized
customer service.
indicate
nearest