6/52
About this documentation
Bosch Rexroth AG, MPS, 3 842 358 709/2016-07
1 About this documentation
1.1 Validity of documentation
This documentation applies to the following products:
• Electrical case lifter
– 3 842 546 991
– 3 842 546 992
This documentation is intended for assemblers, operators, service engineers and
system end users.
This documentation contains important information relating to the safe and
proper assembly, transportation, commissioning, operation, use, maintenance and
disassembly of the product, and on how to rectify simple faults yourself.
Read this documentation in full prior to working with the product, particularly
section 2 ("Safety instructions") and section 3 ("General Information on Property
and Product Damage").
The enclosed EC declaration of conformity 3 842 358 720 is part of these
operating instructions. It must be kept with the operating instructions and
passed on if necessary.
1.2 Required and supplementary documentation
Only start up the product if the documentation marked with the book symbol
is available and you have understood and followed the instructions in it.
Table 1: Required and supplementary documentation
Title
EC declaration of conformity
Electrical case lifter
1.3 Presentation of information
Standardized safety instructions, symbols, terms and abbreviations are used so that
you can use this document to work quickly and safely with your product. These are
explained in the following sections to help you understand them better.
1.3.1
Safety instructions
In this documentation, safety instructions are given in section 2.6 ("Product-specifi c
safety instructions") and in section 3 ("General notes on property and product
damage"), and before a course of action or a required action, in which there is a risk
of personal injury or property damage. Be sure to observe all safety precautions.
Document number
Document type
3 842 358 720
EC declaration of
conformity