8.1 Initial start-up
8.1.1
Symbols on the Basic / Comfort hand switch
Table 6: Symbols on the Basic hand switch
EMERGENCY STOP control unit (push button).
Lift
Lower
Table 7: Symbols on the Comfort hand switch
EMERGENCY STOP control unit (push button).
Operating mode selector switch,
Setting: "Manual (Reset)".
Operating mode selector switch,
Setting: "Automatic".
Lift
Lower
Only applies to the Comfort hand switch:
Set the operating mode selector switch to "Manual (Reset)".
Test the stroke and the end points of the upward and downward movement with
the
"Lift" and
Test the EMERGENCY STOP control unit (push button) on the hand switch.
(Unlock the EMERGENCY STOP control unit again by turning the push button.)
Test the EMERGENCY STOP control unit (push button) on the side of the housing
of the case lifter. (Unlock the EMERGENCY STOP control unit again by turning the
push button.)
"Lower" push buttons on the hand switch.
3 842 358 709/2016-07, MPS, Bosch Rexroth AG
Commissioning
35/52