ELICA NikolaTesla Switch WH/A/83 Montaje Y Modo De Empleo página 83

Bridge Zones
Thanks to the Bridge function, the cooking zones can operate
in a combined way, creating a single zone with the same
power level. This function allows evenly distributed cooking
with large-sized pots and pans.
You can use both the "Master" front cooking zone and the
corresponding "Secondary" cooking zone on the back.
(to check which zones are equipped with this function, see the
illustrated part of this manual).
To activate the Bridge Function:
- simultaneously select the two selection zones of the
cooking zones that you want to use
- the Bridge (21) indicator of the "Secondary" cooking zone
lights up " "
- use the Selection zone (3) of the "Master" cooking zone
to set the operating Power Level
- to disable the Bridge Function all you have to do is to
repeat the activation procedure
Temperature Manager
The Temperature Manager is a control function that allows
you to keep the heat at a constant temperature at an
optimized power level; this feature is ideal for keeping ready
meals warm.
The Temperature Manager function can be enabled by
tapping the activation zone (4)
On the display of the zone active in Temperature Manager
mode will appear the symbol "
Key Lock
The Key Lock allows you to lock the settings of the hob to
prevent accidental tampering with the same, while leaving the
set functions enabled.
Activation:
• push (9)
• the LED over the button will turn on, to indicate that it has
been activated
Repeat the operation to deactivate.
"
Child Lock
The Child Lock makes it possible to prevent children from
accidentally accessing the cooking zone and extraction zone,
preventing the activation of any functions.
The Child Lock can only be activated when the product is on,
but with the cooking zones (and extraction zone) off.
Activation:
• remove any pots from the hob
• push and hold both
acoustic signal indicates that the function is active, and a
" " will appear on the display (13) and (14).
Repeat the operation to deactivate.
Timer
The Timer function is a countdown, which can be set for each
cooking zone (and suction zone), even simultaneously.
At the end of the set period, the cooking zones (or extraction
zone) will automatically shut down and the user will be
informed by way of an acoustic signal.
Activation/Regulation of hob Timer function
• Select the cooking zone (power¹0)
• Press
• Set the duration of the Timer:
press the selector
down time
press the selector
down time
If desired, repeat the operation for the other cooking zones.
Note: Each cooking zone can have a different Timer set;
on the display, (15), the countdown of the last selected hob
will be shown for 10 seconds, after which the countdown
with the least remaining time will be shown.
When the timer has finished the count, it emits a beep (for 2
minutes; you can mute it by tapping
display (15) is flashing, showing the symbol " .
Note: the symbol "
cooking zone when the timer is active.
To switch-off the Timer:
• select the cooking zone
• set the value of the timer to " " , via
Note: the function remains active if no other key is pressed
in the meantime.
83
(9) and the
(8) to access the Timer function
, to increase the automatic shut-
, to decrease the automatic shut-
" (19) appears beside the display of the
(10), an
) , while the
".