Connecting To Network - Pioneer N-P01-S Manual De Instrucciones

Connecting to network

The following is one example of how to connect to a network.
For other connections, please refer to the attached Operating Instructions (CD-ROM)
Connecting this player using wired
LAN
1. Be sure your router supports DHCP server
function.
2. Use the LAN cable to connect this player
and your router.
3. Plug the power cord into an AC outlet.
Press  STANDBY/ON.
B: Connecting to a router with WPS-
PBC function
1. Be sure the LAN cable is not connected to
the player.
2. Plug the power cord into an AC outlet.
Press  STANDBY/ON.
3. Press NET SERVICE SETUP on the
remote control.
4. Select Network Setting WPS.
5. Useto select PBC (Push Button
Confi guration) and then press ENTER.
6. Press the WPS button on the router.
PBC (Push Button Confi guration)
• The wireless connection setting is
automatically confi gured by pressing
the WPS button on the WPS compatible
wireless LAN device.
Connecting this player using
wireless LAN
A: Connection settings using an iOS
device (with iOS 5.0 or later)
You can apply iPod/iPhone/iPad (iOS device
with iOS ver 5.0 or later)'s Wi-Fi settings to
this player.
1. Be sure the LAN cable is not connected to
the player. Unlock your iPod/iPhone/iPad.
2. Plug the power cord into an AC outlet.
Press  STANDBY/ON.
3. Unlock your iPod/iPhone/iPad. Check that
the Wi-Fi mark is displayed on the iOS
device screen.
Share Wi-Fi Settings?
C: Connecting to a router without
WPS-PBC function
1. Be sure the LAN cable is not connected to
the player.
2. Plug the power cord into an AC outlet.
Press STANDBY/ON.
3. Press NET SERVICESETUP.
The Initial Setup screen is shown on the
display.
4. Select Network Setting Network
Confi guration.
5. Useto select Wireless, then press
ENTER.
Network Configuration
Wired
Wireless
6. Useto select Auto, then press
ENTER.
Wireless
Auto
Manual
Wireless Accessory Configuration
Web Control
7. Use  to select the available wireless
network you want to connect to, then press
ENTER.
The player will only display the names of
2.4 GHz wireless LAN routers (SSID).
4. Press iPod/USB on the remote control.
Connect the iOS device to the USB
terminal.
5. Press SETUP.
6. Select Network Setting  Network
Confi guration  Wireless  iOS Device
and then press ENTER.
7. Tap Allow on iPod/iPhone/iPad.
The Wi-Fi settings of your iPod/iPhone/
iPad are applied to the player.
Ignore
Available Wireless Networks Availabl Avai
XXXX XXXXXXXXX XXXXXXXX
8. Use  to enter the Pass Phrase or
WEP Key.
A
[REPEAT]
[CLEAR]
 : Moves the adjusting digit.
 : Changes displayed character.
REPEAT: Switches character types.
CLEAR: Deletes one character at a time.
9. Use  to select DHCP On, then press
ENTER.
Select Don't Use Proxy Server, then
press ENTER.
Network Configuration
DHCP On
DHCP Off
10. In order to activate the setup, press
ENTER.
© 2014 PIONEER HOME ELECTRONICS CORPORATION.
Share Wi-Fi Settings?
Ignore
lable Wi e Wirele reless N ss Netwo etworks rks
XXXXX X
Enter Password
Change Text
Delete One Character
All rights reserved.
5
En