Assembly - Vortice ARIANTE ACQUA BREEZE Manual De Instrucciones

ENGLISH

Assembly

1. Begin by installing the five wheels (19) on the base by pushing them in until they are secured in place (18).
2. Place the main body (15) onto the base (18) and use the base lock (20) to secure the body onto the base.
3. Connect the motor cables (12), then install the fan pole (11) into the body and secure it with the fan pole screw
(13).
4. Install the rear grill (6) on the motor then use the rear grill lock (5) to secure it.
5. Install the fan blade (4) onto the motor spindle (8), then secure it by screwing the blade lock counterclockwise
(3).
6. Place the Sonic Cloud Diffuser (1) on the front grill with the hose inlet facing downwards (2) and gently secure
it with the included screws. Please Note: Do not over-tighten these screws as it can damage the Sonic Cloud
Diffuser casing.
7. Join the front grill (2) with the rear grill (6) and place the grill lock with its screw facing downwards (7) on top
of the grills to join them. Use the screw on the grill lock to tighten it.
8. Connect the mist hose into the Sonic Cloud Diffuser (1). Place the provided batteries into the remote control.
You Acqua Breeze is now fully assembled!
Filling the Tank
Remove the tank by pulling it from the handle, unscrew the filler cap and fill with cold water for best results.
Make sure the water is colder than 40°C. Screw the filler cap and dry the tank surface.
15