Installing Or Removing Shear Blades For Hedge Trimmer; Removing Shear Blades - Makita DUM604 Manual De Instrucciones

Installing or removing shear blades
for hedge trimmer
Optional accessory
CAUTION:
Attach the blade cover before
removing or installing the shear blades.
NOTICE:
If the parts other than the shear blades
such as the crank are worn out, ask Makita
Authorized Service Centers for parts replacement
or repairs.

Removing shear blades

1. Place the tool upside down.
2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
on the undercover is aligned
3. Remove the undercover.
4. Loosen two screws with a screwdriver and remove
the shear blades.
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
5. Remove the crank from the shear blades.
► 1 . Crank
NOTE: The crank may remain in the tool.
NOTE: Attach the blade cover and the storage case to
the removed shear blades, and then store the blades.
12 ENGLISH
1
1