Cleaning Modes - Shark Rotator Lift-Away Pet ZU570 Serie Manual Del Propietário

WHOLE-HOME CLEANING
POWER/SURFACE SWITCH
Select surface setting:
O Power Off
I Hard Floor
For bare floors and small area rugs.
II Carpet
For carpets.
BRUSHROLL INDICATOR LIGHT
INDICATOR LIGHT
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green: The brushroll is spinning and working as it should.
Solid Red: There is a jam in the brushroll area. Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red: The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 45 minutes for it to cool down.
NOTE: For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to MAX suction and Carpet.
s h a r kc l e a n . c o m
SETTINGS
SUCTION CONTROL
Suction Control offers variable suction
based on your needs. Slide to MIN to reduce
suction and increase maneuverability on
carpets. Slide to MAX to increase suction on
bare floors.
WHOLE-HOME CLEANING

CLEANING MODES

UPRIGHT
To engage brushroll, turn power on,
then place foot on floor nozzle and
tilt handle back.
ABOVE-FLOOR—HANDLE
Press the Handle Release button on the back
of the wand to detach the handle from the wand.
LIFT-AWAY®
Press the Lift-Away button to detach the pod
from the floor nozzle.
NOTE: All accessories are compatible with both the wand and the handle.
ABOVE-FLOOR—WAND
Press the Wand Release button on the back
of the vacuum to detach the wand from the pod.
LIFT-AWAY®
With pod removed, press the Wand Release
button to detach the wand from the pod.
s h a r kc l e a n . c o m