Stihl BR 200 Manual De Instrucciones página 17

Cold engine (cold start)
Turn the choke knob to g.
N
Warm engine (warm start)
Turn the choke knob to <.
N
Also use this setting if the engine has
been running but is still cold.
BR 200
Starting
Place the unit securely on the
N
ground and make sure that
bystanders are well clear of the
nozzle outlet.
Make sure you have a firm footing:
N
Hold the unit with your left hand on
the carrying handle and put one foot
against the base plate to prevent it
slipping.
Pull the starter grip slowly with your
N
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
Continue cranking until the engine
N
runs.
Other hints on starting
If the engine stops while the choke knob
in on g or during acceleration
Move the choke knob to < and
N
continue cranking until the engine
runs.
If the engine does not start
Make sure all settings are correct
N
(choke knob, setting lever in run
position F).
Repeat the starting procedure.
N
If fuel tank has been run completely dry
and then refueled
Press the manual fuel pump bulb at
N
least five times – even if the bulb is
filled with fuel.
English
15