Information Before You Start; Starting / Stopping The Engine - Stihl BR 200 Manual De Instrucciones

English

Information Before You Start

NOTICE
With the engine stopped and before
starting, check the air intakes between
the backplate and powerhead for
blockages and clean if necessary.
Functions of setting lever
1
2
Run position F
Engine runs or is ready to start. Throttle
trigger (2) can be moved to any position.
Switch off engine †
Ignition is interrupted, engine stops. The
setting lever (1) is not locked in this
position. It springs back to the run
position F. The ignition is switched on
again.
14
Fixed throttle
1
2
The throttle trigger (2) can be locked in
any position by operating the setting
lever (1).
To disengage the lock:
Return the setting lever (1) to the
N
run position F.
Starting / Stopping the
Engine
Starting the Engine
Observe safety precautions.
N
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
Move the setting lever the run
N
position F.
Press the manual fuel pump bulb at
N
least five times – even if the bulb is
filled with fuel.
BR 200