Modem Settings - Nokia 6101 Manual Del Usuario

S e t t i n g s
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone to receive data using IR, select
Settings > Connectivity
To deactivate the IR connection, select
When the phone displays
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.
Packet data (EGPRS)
Enhanced general packet radio service (EGPRS), packet data, is a network service
which allows mobile phones to send and receive data over an Internet protocol
(IP)-based network. It enables wireless access to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions, e-mail,
remote SyncML, Java application downloading, and the PC dial-up.
To define how to use the service, select
Packet data > Packet data
Select When needed
application needs it. The connection will be closed when the application is terminated.
Select Always online
network when it is switched on.
indicates a packet data connection.

Modem settings

You can connect the phone using an IR or a data cable (CA-42) connection to a
compatible PC, and use the phone as a modem to enable packet data connectivity
from the PC.
To define the settings for connections from the PC, select
Connectivity > Packet data
the access point you want to use, and select
for access point, and enter a nick name for the currently selected access point.
Select Packet data access
a connection to an EGPRS network.
> Infrared.
Menu
Deactivate infrared?, select Yes.
Menu
connection.
to set the packet data connection to be established when an
to set the phone to automatically connect to an packet data
> Packet data settings
point, and enter the access point name (APN) to establish
42
> Settings > Connectivity
> Settings > Connectivity
Menu
> Active access
Edit active access point. Select
Copyright © 2005 Nokia
Menu >
> Infrared.
>
> Settings >
point, activate
Alias