Product Specifications; Rules For Safe Operation - Makita GB602 Manual De Instrucciones

ENGLISH
Model
Wheels:
Diameter
Width
Arbor Hole
No load speed
-1
(min )
Power Input
Overall length
Net Weight
............... Look for this symbol to point out important safety precautions.
It means attention!! Your safety is involved.
Safe operation of this power tool requires you read and
understand this operator's manual and all labels affixed to
the tool. Safety is a combination of common sense,
staying alert, and knowing how your bench grinder works.
READ ALL INSTRICTIONS
■ KNOW YOUR POWER TOOL. Read the operator's
manual carefully. Learn the applications and limitations
as well as specific potential hazards related to this tool.
■ GUARD AGAINST ELECTRICAL SHOCK by
preventing body contact with grounded surfaces. For
example: pipes, radiators, ranges, and refrigerator
enclosures.
■ KEEP GUARDS IN PLACE and in working order.
Never operate the tool with any guard or over removed.
Make sure all guards are operating properly before
each use.
■ REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see keys and adjusting
wrenches are removed from tool before turning it on.
■ KEEP THE WORK AREA CLEAN. Cluttered work
areas and workbenches invite accidents.
■ AVOID DANGEROUS ENVIRONMENTS. Do not use
power tools near gasoline or other flammable liquids, in
damp or wet locations or expose them to rain. Keep
work area well lighted.
■ AVOID SUNLIGHT TO THE TOOL WHEN PLACING
OR STORING IT.
■ KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses and be kept a safe distance
from work area.
■ MAKE WORKSHOP CHILD PROOF with padlocks,
master switches, or by removing starter keys.
2

PRODUCT SPECIFICATIONS

GB602
6 in. (150 mm)
5/8 in. (16 mm)
1/2 in. (12.7 mm)
2,850 (50Hz)
3,450 (60Hz)
250W
375 mm
9.4 kg

RULES FOR SAFE OPERATION

GB602W
6 in. (150 mm) 6 in. (150 mm)
1/4 in. (6.4 mm) 5/8 in. (16 mm)
1/2 in. (12.7 mm) 1/2 in. (12.7 mm)
2,850 (50Hz)
3,450 (60Hz)
250W
375 mm
9.5 kg
■ DON'T FORCE THE TOOL. It will do the job better and
safer at the rate for which it was designed.
■ USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job for which it was not designed.
■ USE THE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition. When using
an extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating. A wire gauge size (A.W.G) of
at least 16 is recommended for an extension cord
8 meters or less in length. If in doubt, use the next
heavier gauge. The smaller the gauge number, the
heavier the cord.
■ INSPECT EXTENSION CORDS PERIODICALLY and
replace if damaged.
■ WEAR PROPER APPAREL. Do not wear loose
clothing, neckties. Or jewelry that can get caught in the
tool's moving parts and cause personal injury, Non-
solid footwear is recommended when working
outdoors. Wear protective hair covering to contain long
hair.
■ ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses are NOT safety
glasses.
■ PROTECT YOUR LUNGS. Wear a face or dust mask if
the cutting operation is dusty.
■ PROTECT YOUR HEARING. Wear heating protection
during extended periods of operation.
■ DON'T ABUSE CORD. Never carry tool by the cord or
yank it to disconnect from receptacle. Keep cord away
from heat, oil, and sharp edges.
■ DO NOT OVERREACH. Keep proper footing and
balance at all times.
GB801
8 in. (205 mm)
3/4 in. (19 mm)
5/8 in. (15.88 mm)
2,850 (50Hz)
3,450 (60Hz)
550W
395 mm
20.5 kg