Makita GB602 Manual De Instrucciones página 5

■ Carefully remove all parts from the shipping carton.
■ Lift the bench grinder from the carton and place it on a
work surface.
■ Do not discard the packing materials until you have
carefully inspected the machine, identified all loose
parts, and satisfactorily operated your bench grinder.
■ Examine all parts to make sure no breakage or
damage has occurred during shipping.
■ If all parts have been included, proceed to assembly.
KNOW YOUR BENCH GRINDER
See Fig. 3.
Before attempting to use your new tool, familiarize
yourself with all operating features and safety
requirements.
Carefully read this operator's manual before using your
grinder.
POWER SWITCH
An easy access On/Off switch convenience and safety.
MOTOR
Powered by a precision-built electric induction motor, your
bench grinder has sufficient power to handle tough
grinding jobs.
GRINDING WHEEL
Equipped with coarse and fine grinding wheels to suit
most applications.
NOTE:
New wheels sometimes require dressing to true up the
face of the wheel.
SAFETY EYE SHIELD AND SPARK DEFLECTOR
The safety shields and spark deflectors are adjustable for
operator convenience. Operating the grinder without
these features attached could result in serious injury. Do
not grind with the safety shield raised; always wear safety
glasses for personal protection.
WORK REST
The work rests are independently adjustable to
compensate for wheel wear. Before grinding, make
certain the work rests are adjusted properly. Generally the
WARNING:
The operation of any grinding can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield when needed.
We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields.
UNPACKING
FEATURES
■ If any parts are damaged or missing, do not attempt to
plug in the tool or turn it on until the damaged or
missing parts are obtained and installed correctly.
■ Contact your nearest dealer for assistance if parts are
missing or damage.
WARNING:
If any parts are missing do not operate this machine until
the missing parts are replaced. Failure to do so could
result in possible serious injury.
object being ground is done slightly above center of the
grinding wheel.
Adjust the distance between the wheel and work rest to
maintain 1.6 mm. or less separation as diameter of the
wheel decreases with use.
With a permanently mounted work light that automatically
lights the work area for safer, more accurate grinding and
sharpening.
COOLANT TRAY
When grinding, metal objects become heated quickly. It is
important to keep moving the object back and forth across
the grinding wheel and to cool the object frequently using
the grinder's Coolant Tray.
5