ivory Silk Line Instrucciones De Uso página 38

preventing the bur from fitting in the spindle correctly.
Never attempt to fit an instrument to a rotating micromotor.
DANGEr!
Never apply excessive pressure to burs. They could break,
bend or become difficult to extract.
DANGEr!
If you notice any unusual noise, vibration, overheating,
interruption in the flow of cooling liquid, leakage or
changes in the colour of the LED, stop using
CAUTION!
Always check that the cooling system is unobstructed be-
fore starting work.
1) Turn the locking ring (1) anti-clockwise until it clicks,
and push in the bur (2) as far as it will go.
2) Turn the locking ring (1) clockwise until it clicks.
36
Eng
3) Check that the rotary bur is securely held in the
handpiece.
4) Turn the locking ring (1) anti-clockwise until it clicks,
and remove the rotary bur (2).
2