Outputs; Operation Of The Unit; Digital Operator; Interface Operator - KEB COMBIVERT F4-S Serie Manual De Instrucciones

3.2.3 Outputs

4. Operation of the
unit

4.1 Digital operator

Part-No. 00.F4.010-2009

4.1.1 Interface operator

Part-No. 00.F4.010-1009
5 4 3 2 1
9 8 7 6
Installation and Connection
1 2
Relay output:
30V DC / 1A
As an accessory to the local operation an operator is necessary. To
prevent malfunctions, the inverter must be brought into nOP status
before connecting/disconnecting the operator (open control release
terminal X1.14). When starting the inverter without an operator, it is
started with the last stored values or factory setting. The operator is
obtainable in different versions:
Interface control
Transmit "LED flickers"
In the Interface operator there is an additional isolated RS232/RS485-
Interface integrated.
PE-Connection
PIN RS485 Signal
1 – –
2 – TxD
3 – RxD
4 A' RxD-A
5 B' RxD-B
6 – VP
7 C/C' DGND
8 A TxD-A
9 B TxD-B
Informations about other versions of operators contact KEB!
PE
3 9 10
Analog output:
+
0...10VDC / max. 5mA
at Ri 56 kΩ const.
0...1mADC at
Ri ≤ 5 kΩ const.
5-digit LED Display
START
ENTER FUNC.
F/R SPEED
STOP
Double function keyboard
Meaning
reserved
Transmitter signal/RS232
Receiver signal/RS232
Receiver signal A/RS485
Receiver signal B/RS485
Voltage supply-Plus +5V (I
Data reference potential
Transmitter signal A/RS485
Transmitter signal B/RS485
ANTRIEBSTECHNIK
Operating-/Error display
Normal "LED on"
Error "LED blinks"
RS232/RS485
= 10 mA))
max
GB
31