Storing; Blower; Cleaning; Cleaning The Blower - Stihl BGA 200 Manual De Instrucciones

20 Storing

20 Storing

20.1 Blower

WARNING
Store the blower indoors in a dry, secure place that is
inaccessible to children and other unauthorized users,
@ 6.1. Improper storage can result in unauthorized use and
damage to the blower, @ 6.1.
WARNING
To reduce the risk of unintended activation, never store the
blower with the connecting cord inserted. Always remove the
connecting cord before storing.
When storing the blower:
► Clean the blower, @ 21.
► Store the blower indoors in a dry and secure location, out
of the reach of children and other unauthorized persons.

21 Cleaning

21.1 Cleaning the Blower

WARNING
To reduce the risk of personal injury from unintended
activation, remove the connecting cord before carrying out
any cleaning work, @ 6.1. Users of this blower should carry
out only the cleaning described in this manual.
To clean the blower and battery:
► Clean a dirty intake screen carefully with a soft brush
whenever required.
► Clean the blower's polymer components with a slightly
dampened cloth. Do not use detergents or solvents. They
may damage the polymer components.
► Do not use a pressure washer to clean the blower or
otherwise spray it with water or other liquids.
0458-812-8621-A
► Keep the socket free from foreign matter and clean as
necessary with a soft brush or soft, dry cloth.
NOTICE
Never spray the power tool with water. Spraying it with a
stream of water could result in damage to the electronics
and other systems.
21.2 Cleaning the Contact Surfaces of the
Connecting Cord
► Remove the Connecting Cord, @ 14.2.
1
1
► Clean the contact surfaces (1) with a dry cloth.
► If discoloration (arrow) is still visible on the contact
surfaces: Sand down the discoloration with fine grade
sand paper (P 600) until the contact surfaces shine again.
English
1
33