Cables, Extensions And Plugs; Removing Sawdust Generated During Use - Kunzle & Tasin Bona Scorpion Manual De Funcionamento

Commencing Operation (Cont.)

Cables, extensions and plugs

Only use approved cables. The maximum recommended cable length is 7m; for greater lengths use cables with a
larger cross-section.
MACHINE WITH 230V~50Hz MOTOR
For machines with a 230-240V~50Hz motor (EU) a HO5VV-F-3x1.5mm2 HAR-approved power supply cable must be used
along with an approved SCHUKO 2P+E 16A 200-250V plug.
MACHINE WITH 115V~60Hz MOTOR
For machines with a 115V~60Hz motor (US) a HAR-approved SWO 10/3 yellow power supply cable must be used along
with an approved TWIST LOCK 30A 250V plug.

Removing sawdust generated during use

The machine must never be moved using its cable and the cable must never be pulled when
disconnecting from the socket.
Keep the cable away from sources of heat, oil and sharp edges.
Using the machine with unsuitable and/or excessively long cables may cause injury or
damage to people or objects.
Bona Scorpion Manual
Sawdust can ignite spontaneously and cause injury
or damage. Empty the contents of the dust bag
when it is 1/3 full into metal containers which are
located outside the building. Empty the dust bag
at the end of each machine use. Never leave the
dust bag unattended when it contains sawdust.
DO NOT empty the contents of the dust bag above
a fire.
EN
11