Oakley HOLESHOT Manual De Instrucciones página 11

10 HOLESHOT INSTRUCTION MANUAL
ADJUSTING THE CHRONOGRAPH HANDS
When the chronograph is reset with button "B," the three chronograph hands return
to the zero position. If these hands do not align precisely with the zero position
(such as after a battery change), use the following procedure to adjust them.
TO ADJUST THE CHRONOGRAPH HANDS
1. If the chronograph hands currently show a measured time, use button "B" to reset
them near the zero position.
Note that the hands must be stopped before
using button "B" to reset them. If necessary,
use button "A" to stop the hands.
2. Pull the crown out to the first click position
(a). Press button "A" to adjust the
chronograph hand that counts 1/10 seconds.
(Press and hold the button for continuous
movement.)
Press button "B" to adjust the chronograph
hand that counts seconds. (Press and hold
the button for continuous movement.)
3. Pull the crown out one more click, to the
second click position (b).
Press button "A" to adjust the chronograph
hand that counts minutes. (Press and hold
the button for continuous movement.)
4. Push the crown back down.
Chronograph
Minutes
Chronograph
Second Hand
Chronograph
1/10 Second
Button A
Crown
A B
Button B