Using The Chronograph - Oakley HOLESHOT Manual De Instrucciones

The chronograph includes three separate hands:
• The narrow hand on the main dial face counts seconds. One full rotation is
60 seconds.
• The hand on the sub dial at the left counts minutes. One full rotation is
30 minutes.
• The hand on the sub dial at the right counts 1/10 seconds. One full rotation
is 1 second.
The chronograph is controlled with two push buttons:
• Button "A" stops and starts the timer.
• Button "B" has several functions. In addition to pausing the display at the
current intermediate or "split" time, it allows the chronograph hands to catch
up to the ongoing time being measured, and it resets the chronograph hands
to the zero position.
Before using the chronograph functions, make sure the crown is fully against the
case and not at one of the click positions used for setting time and date. The
three chronograph hands should align precisely at the zero position. If they do
not, see the section on Adjusting the Chronograph Hands.
HOLESHOT INSTRUCTION MANUAL 05

USING THE CHRONOGRAPH