Assembly And Installation Manual; B1 Pulimatic Installation - Acqua Brevetti PuliMATIC Manual De Instrucciones Para El Uso Y El Mantenimientomanual De Montaje E Instalación

ASSEMBLY AND INSTALLATION MANUAL

B1 PULIMATIC INSTALLATION

B1.1 Before installation
Before installing PuliMATIC make sure that the system delivers water intended for
human consumption complying with the provisions of the Italian Legislative Decree No.
31/01, as subsequently amended and supplemented.
PuliMATIC is not equipped, in its standard version, with anti-flooding devices or with devices aimed
at verifying, checking and triggering an alarm in the event of uncontrolled water leaks. If necessary,
provide for a suitable anti-flooding device separately.
Check for the presence of a visible drain properly dimensioned in order to correctly receive and
drain the water coming from the filter during the washing stage.
Do not install PuliMATIC downstream of boilers or in applications involving the passage inside the
filter of water above 30 °C. Install PuliMATIC upstream of the equipment to be protected.
Pay attention to the threads of the connections that could cause hand cuts and abrasions.
B1.2 Characteristics of the place of installation
PuliMATIC must be installed in a hygienically suitable, dry, clean place, indoors, away from: frost,
direct exposure to sunlight, humidity and atmospheric agents (rain, snow, hail). Do not install
PuliMATIC in wells, near drains, in foul-smelling places. Do not install it where there may be
chemical vapors, gases or fumes of any kind. Avoid installation in confined spaces that do not
allow an easy performance of the ordinary and extraordinary maintenance operations.
The permissible limit values of the environmental parameters for the installation of PuliMATIC are
as follows:
Minimum/maximum ambient temperature (°C):
B1.3 Applicable regulations
The installation of PuliMATIC must be performed in compliance with the provisions of the Italian
Ministerial Decree N. 37/08, as well as of the Italian Ministerial Decree No. 25/12. Before installing
the filter, make sure that the system complies with any laws or regulations in force or local
recommendations issued by competent local offices.
B1.4 General instructions for installation
Installation has to be carried out in a workmanlike manner, in compliance with all applicable laws
and the rating plate data of the appliance itself. The plumbing system in which the filter is installed
and the installation of the filter itself must be carried out in compliance with the laws in force (Italian
Ministerial Decree No. 37/08). The Manufacturer declines all liability for damages to property or
persons resulting from the incorrect installation of the filter and/or the installation of the filter in a
system not complying with the laws in force.
All materials used for the construction of water distribution systems for human consumption must
comply with the Italian Ministerial Decree No. 174/04. The construction and modification of a water
distribution system intended for human consumption requires performing the interventions in such
a way as not to jeopardize the hygiene of the system. After its construction or modification, a water
distribution system intended for human consumption has to be washed and disinfected according
to the requirements of the EN 806:4 standard. The filter must not be installed between the boiler
and the safety devices.
The plumbing systems created for the installation of equipment connected to the water supply
network must be equipped with a system capable of ensuring the non-return in the network of the
treated water, as well as with a manual or automatic by-pass valve system that allows the delivery
of untreated water, interrupting the supply of the treated one.
The filter drain connection must be conveyed into a visible drain in a stable manner.
Prevent solvents, oils, greases, acidic or caustic substances and detergents to come into contact
with the external plastic and brass parts of the equipment. In case of very strong bumps during
transport or assembly, do not install the equipment and replace it even if there are no patent
PuliMATIC - ENGLISH
5 - 40
MAN141 PAGE E-19