Advanced Functions - SOMFY Orea WT Guía Rápida De Inicio

EN

2. 4. 3. Advanced functions

1
Contact the manufacturer of the driven product before using these functions to ensure
that they are compatible with your installation.
Obstacle detection function
This function is used to increase or decrease the obstacle detection sensitivity of the awning
cassette, which can be set to three levels (high-medium-low).
By default, the drive is factory-set to medium sensitivity.
Before starting the setting procedure, place the awning at its half-way position.
To activate this function:
Press the "Up" and "Down" buttons until the awning
1)
moves back and forth.
Press the "Up" or "Down" buttons until the awning
2)
moves back and forth to adjust the obstacle detection
level.
a) A brief back and forth movement indicates that
obstacle detection is set to medium sensitivity.
b) A long back and forth movement indicates that
obstacle detection is set to either low or high
sensitivity.
Press the "Up" and "Down" buttons until the awning
3)
moves back and forth.
The last level is saved.
2. 4. 4. 5HVWRULQJ WKH RULJLQDO FRQ¿JXUDWLRQ
1
Use universal adjusting cable 9015971 (follow the instructions in the corresponding
manual for connection), or use a non-locking double push-button switch.
Simultaneously press the adjusting cable or non-locking
-
double push-button switch "Up" and "Down" buttons
until the awning moves back and forth once, then
again.
7KH GULYH LV EDFN LQ LWV RULJLQDO FRQ¿JXUDWLRQ
‡
38
Non contractual images
1)
3s
a)
3)
8s
Copyright © 2005 - 2014 Somfy SAS. All rights reserved.
2)
b)
3s