Modifying The End Limits; Advanced Functions; Tips And Recommendations; Replacing A Lost Or Broken Somfy Io Control Point - SOMFY SGH io Guía Instalador

7.3.

Modifying the end limits

The up and down limits can be modified.
Readjusting the upper end limit
1) Set the roller shutter to the upper end limit.
2) Press the Up and Down buttons simultaneously until the
roller shutter makes a movement: the motor is in setting
mode.
3) Adjust the high position of the roller shutter using the Up
or Down buttons.
4) Press the "my" button until the roller shutter makes
a movement: the new upper end limit has been
programmed.
Readjusting the lower end limit
1) Set the roller shutter to the lower end limit.
2) Press the Up and Down buttons simultaneously until the
roller shutter makes a movement: the motor is in setting
mode.
3) Adjust the low position of the roller shutter using the Up
or Down buttons.
4) Press the "my" button until the roller shutter makes
a movement: the new lower end limit has been
programmed.
Readjusting of flat slats
1) Set the roller shutter to the favourite position (my).
2) Press simultaneously and hold the Up and Down
buttons for 5 seconds, until the roller shutter makes a
movement.
3) Adjust the "slats flat" position using the Up or Down
buttons.
4) Press the "my" button until the roller shutter makes a
movement. The new "slats flat" position is programmed.
Check the orientation of the slats in the favourite
position after having set the "slats flat" position:
if necessary, refer to chapter "Modification of the
favourite position (my)".
7.4.

Advanced functions

Contact the roller shutter manufacturer before using these functions to check the compatibility of
your systems.
8.

TIPS AND RECOMMENDATIONS

8.1.

Replacing a lost or broken Somfy io control point

Refer to the corresponding guide.
Copyright © 2010 Somfy SAS. All rights reserved.
1 2
3 4
1 2
3 4
1 2
my
3 4
SGH io
> 5 s.
15