Gas Connection - Amica 6020GG4.23ZpQ Manual De Instrucciones

INSTALLATION
Mounting the overturning prevention
bracket.*
The bracket is mounted to prevent overtur-
ning of the cooker. When the overturning
prevention bracket is installed, a child who
climbs on the oven door will not overturn the
appliance.
Cooker height 850 mm
A = 60 mm
B = 103 mm
Cooker height 900 mm
A = 104 mm
B = 147 mm
*optional
B
A
47

Gas connection

Caution!
The cooker should be connected to a
gas supply of the particular type of gas
that the appliance is manufactured to
function with. Information about the
type of gas that the cooker has been
adapted to by the factory is shown on
the data plate. The cooker should be
connected exclusively by an appropri-
ately authorised fitter and only he or
she has the right to adapt the cooker
to a different type of gas.
Tips for the installer
The installer must:
l have appropriate qualification,
l read the information on the nameplate
concerning the type of gas, for which the
appliance is intended; this information
must be compared with the gas supply
specification at the place of installation,
l check:
- effectiveness of ventilation, i.e. exchange
of air in the room,
- tightness of gas fittings,
- proper operation all the cooker functional
components,
- that the electrical system incorporates a
protective conductor.
l for proper operation of igniters and flame
failure cut-off device, adjust the position of
the gas knobs with the supplied washers,
- check the operation of igniters and flame
failure cut-off device,
- in the event of faulty operation, remove
the knob, make adjustments by inserting
a washer (washers) on the valve pin,
- once adjusted, protect the system with
a clamping washer and replace the knob.
l provide the user with the gas hob instal-
lation certificate and give instructions on
the appliance operation.