Product Description; The Remote Control - GUTMANN Llano Instrucciones De Uso

en

Product description

1 Hood body
2 Hinged glass panel
3 Metal filter
4 ON-OFF switch, IR sensor
5 Lighting
6 linkage
The Llano hood represents a further
innovation in the long line of design and
technical ideas from the GUTMANN
Company. The model is entirely inte-
grated into the ceiling – created for
those who like full head clearance when
cooking and who wish to have their own
individual style reflected in the kitchen.
The mode of operation:
Due to the suction at the edge of the
glass panel of the hood, (edge extrac-
tion), a flow is created underneath the
ceiling, which flows towards the hood
due to the application of innovative tech-
nology. Fumes and vapours rise up-
wards due to their own thermal dynam-
ics, are collected there by the circulating
flow and extracted by the hood.
Instruction Manual
The functions of the hood as well as the
power level of the external motor can be
controlled in two different ways:
1. Operation via remote control
(recommended)
14
2. Operation via switch
Recommendation:
When cooking in front, open glass

The remote control

ON/OFF
To switch on, press the field with the
ON/OFF symbol. The fan runs at the 3.
level. To switch off, press the ON/OFF
symbol again. (1)filter saturation Button
pressures (~15sec.) to a
off !
Increasing fan power
Press the symbol Increase fan power.
The fan power is increased by one level
each time the field is pressed.
Reducing fan power.
Press the symbol Reduce fan power.
The fan power is reduced by one level
each time the field is pressed until level
1 is reached.
Lighting
Press the button with the lighting symbol
to switch on the lighting. The lighting is
switched off by pressing the button
again. The lighting is dimmed by press-
ing and holding the lighting symbol.
Intensive level
Maximum fan power is reached by
pressing the button Intensive level. The
fan power switches back by one level
after 5 minutes.
Automatic follow-up time
The automatic follow-up time is acti-
vated by pressing the field with the Fol-
low-up time symbol. The follow-up time
symbol (LED) lights up. The extractor
hood switches from level 3 back top
level 1 and runs at this level ~15 min-
utes before switching off.
red LED goes