GUTMANN Adelante 4 Instrucciones De Uso página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
en
seeps into the appliance during the cleaning
process.
Untimely cleaning of the surface saves later
a troublesome removing of stubborn soiling.
For the cleaning use only commercial
detergent or all-purpose cleaners which are
suitable for stainless steel / aluminium.
Please do not use scouring agents or steel
wool!
After the cleaning of the extractor hood please
tend the stainless steel surfaces with a high-
grade steel-care product.
Only with a light soapy water and a very soft
cloth varnished surfaces have to be cleaned.
Please clean the glass front with a
commercial glass cleaner and wipe with a soft
cloth.
Exchange and cleaning of the
filter
Fire risk! The performance of the extractor
hood is affected by containing fat remains and
therefore the fire risk increases. To prevent a
fire risk please clean the metal filter regularly
(see display "filter cleaning"). The metal
grease filter must be cleaned every 2 weeks
at last / at the latest.
For this swing at first the small front glass
pane with one hand upwards and then take
the filter out at its grip. The metal grease filter
is fixed by a magnet.
The metal grease filter is to be cleaned at
best in a dishwasher or in hot soapy water.
Aggressive cleaners should not be used.
The guarantee can´t be applied if a
discolouring on the filter is a result of using
an aggressive dishwashing liquid. Please
avoid temperatures over 55 degrees. Attenti-
on: do not use 3-phase-cleaners or clean the
filter in a commercial dishwasher.
The use of aggressive cleaners like fuel,
acetone, trichlorethylene destroys the filter!
Reinstate the metal filter after the cleaning
and let the front glass pane down again with
one hand.
Exchange of the active carbon filter
(option:only extractor hoods with circular air–version
D)
Active carbon filters bundle up odorous
substances which are contained in the kitchen
fume. According to the strain of work this filter
has to be exchanged after 3-6 months.
- press the catch in the direction of the arro
wand flap down the filter frame
- exchange of the active carbon filter
- turn up the filter frame and secure
Activated carbon filter (option)
For activated carbon filters fitted in GUT-
MANN extractor hoods (C Version), please
read the separate operating instructions
provided!

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Adelante4

Tabla de contenido