General Maintenance - Krups EA80 Serie Manual De Instrucciones

To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS (XS 3000) cleaning tablet.
If your machine is unplugged when cleaning or if there is a power cut, the cleaning
programme will re-start at the step in progress when the incident occurred. You will
not be able to postpone this operation. This is essential due to water system rinsing
reasons. In this case, a new cleaning tablet may be required. Be sure to complete
the entire cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning
solutions are accidently swallowed). The cleaning cycle is a continuous cycle and the
pump can be heard intermittently. Do not put your hands under the coffee outlets
during the cycle.
Press the key to start the automatic cleaning program when the "Cleaning needed"
message is displayed. Just follow the instructions shown on the screen.
The automatic cleaning program is in 2 parts – the cleaning cycle itself, then 1 rinsing cycle.
This program lasts about 13 minutes. Press
choose MAINTENANCE => OK => CLEANING from the menus displayed.
Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage
that may result from the use of tablets from other brands.
You can obtain cleaning tablets from KRUPS Service Centres.
Automatic scale removal program – total duration: about 20 minutes
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please
remove this cartridge during the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The appliance
will automatically warn you with a message when you need to proceed with scale removal.
To perform the cleaning program, you will need a container with minimum capacity of 0.6
litres and a KRUPS F 054 (40 g) cleaning sachet.
Press the key to start the automatic cleaning program when the "Scale removal
needed" message is displayed. Just follow the instructions shown on the screen, making
sure the sachet dissolves fully.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing
cycles.
Only use KRUPS scale removal products. You can obtain scale removal products from
KRUPS Service Centres. The manufacturer may not be held responsible for damage to the
appliance through use of other products.
If a power cut occurs during the cycle or if you unplug your machine, the cycle will
re-start at the step in progress when the incident occurred, without the option of
postponing this operation.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication. The
scale removal cycle is a continuous cycle and the pump can be heard intermittently. Do not
put your hands under the coffee outlets during the cycle.
Make certain to protect your work surface during scale removal cycles, especially if
they are made of marble, stone or wood.

General maintenance

Always remove the power supply cord from the socket and let your appliance cool down
to perform cleaning at any time and then
21