General Maintenance; Moving The Appliance; Electrical Or Electronic Product At End Of Service Life; Troubleshooting And Corrective Actions - Krups EA 8108 Manual De Instrucciones

Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body of the appliance on the outside using a moist cloth.
Clean the cleaning drawer, the drip tray, the coffee
grounds collector and the drip tray grid using warm
water and washing up liquid detergent.
These parts are not designed to go into the dishwasher.
Keep the packing and use it again to move the appliance.
If the unpacked appliance is dropped, it is advisable to have it inspected by an authorised Service Dealer.

ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE

Let's all help protect the environment!
Your appliance contains many recyclable materials that can be re-used.
Take it to a civic waste collection point.
The appliance does not turn on after I press
the button.
Water or steam are coming out of the steam
nozzle unexpectedly.
The espresso or coffee is not hot enough.
The coffee is too weak or not strong
enough.
The coffee flows too slowly.
The coffee is not creamy enough.

GENERAL MAINTENANCE

MOVING THE APPLIANCE

TROUBLESHOOTING, CORRECTIVE ACTIONS
Check that the power supply cord plug is correctly inserted in the socket.
If used often, some drops of water may run out of the steam nozzle.
Change the coffee temperature setting.
Heat the cups by rinsing them under hot water.
Check that the coffee bean compartment contains coffee and that it is running
through properly.
Avoid using oily, caramelised or flavoured coffee beans.
Reduce the volume you have selected using the knob.
Select the
Turn the fineness of grind button to the left to obtain a finer grind.
Make your coffee in two separate cycles by using the 2 cup function.
Turn the fineness of grind button to the right to obtain a coarser grind (may
depend on the kind of coffee being used).
Carry out one or more rinsing cycles.
Turn the grinding fineness knob towards the left for a finer grind (may depend
on the type of coffee used).
Change the Claris Aqua Filter System cartridge (follow the installation proce-
dure on page 3).
Carry out one or two rinsing cycles.
Rinse the water tank
with fresh water.
button.
12