Programming; Programming Pre-Set Buttons - Vitamix ON-COUNTER Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The Quiet One® is pre-programmed with an Advance® program which is optimized
for the Advance® container. The program can be customized by using the control
panel, or a programming chip or programmer software kit available from Vitamix®.
Call your distributor or customer service for more information.

Programming Pre-Set Buttons

1. A ccess the 34 stored programs by activating the power switch located on the back
of the motor base while depressing the High Pulse button. The display will say
"BUTTON SET UP"
2. Press the Speed or buttons to scroll through the "Recipe" numbers until you
reach the one you want. (For a description of each recipe, see page 12.)
3. Press the Pre-Set button that you want to program for the recipe selected.
BUTTON SET UP
RECIPE 1
BUTTON SET UP
RECIPE 17
BUTTON SET UP
RECIPE 17-------->1
READY
Custom Programmed Chip
10
P R O G R A M M I N G
For Example: If you wanted to program
button 1 with recipe #17:
1. A fter accessing the stored programs as described in step 1,
the display window will say "BUTTON SETUP."
2. P ress the Speed button until the screen displays "Recipe 17."
3. Press the 1 button to apply Recipe 17.
4. E ither continue programming the other five buttons or
press the High Pulse button to exit and continue blending.
Programming your Machine
with a Custom Chip
1. Turn on the machine.
2. R emove the container and rotate the machine to the rear so
that you can see the programming port.
3. W ith the rear of the machine facing towards you, insert
the custom programmed chip (with the words, "THIS SIDE
FACING TO THE FRONT OF THE MACHINE" toward the left)
into the port located on the right hand side of the machine
opposite the On/Off switch. Push gently until chip engages
into the port. The display window will read "NEW MODULE."
4. W ithin 10 seconds, the six Pre-Set buttons will be
re-programmed and the display window will read
"Saved" then "Ready."
5. R emove the programming chip, return it to the original
package and store in a safe, easily accessible spot.
6. P ress one of the six Pre-Set buttons to reveal, in the display
window, the name of the program/drink.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

In-counter

Tabla de contenido