Vitamix ON-COUNTER Manual De Uso Y Cuidado página 9

Display Window: This area, depending on which button is pressed, displays
a variety of operation messages. A "Ready" message appears when there is
power to the machine.
Owner Controls: The owner control panel is accessible by activating the Power
Switch located on the back of the motor base while depressing button 2.
VITA-MIX CORP
VERSION #201
TEMP COUNT TOTAL
NORM 25 100
TIMER HR: MIN: SS
0: 10: 33
VITA-MIX ADVANCE
PROGRAM #201
1 TO OVERWRITE
CURRENT PROGRAM
• T he second press will reveal the name of the program controlling the
Pre-Set buttons. If you are using the Advance
"VITA-MIX ADVANCE PROGRAM."
• T he third press will reveal an option to reset the Pre-Set buttons to the
original factory settings.
Pulse Buttons: The pulse provides a quick increase or decrease in speed of the
blade when blending or refreshing a drink. Press
speeds that range from 51%-100%. Press
a range of 50%-7%. The Pulse button will override the running program as long as it
is depressed. Once released, the original program continues its cycle.
• The Pulse High ( ) and Low (
To set, while pressing and holding a Pulse button, press the Speed or button until
the desired motor speed is reached. The pulse speed will remain at this setting until
changed again with the Speed buttons.
• O nce the unit powers up, the display will cycle through
three screens. The first indicates the current program
version. The second indicates which program is running on
the machine. The third will indicate the motor temperature
(NORM, WARM, HOT), and the total hours of operation,
including production and testing. This time can not be cleared.
Once this screen is reached, button 2 can be released.
• D epress button 2 within 12 seconds to scroll through
the menu settings.
• T he first press will reveal the timer. Total operation
is recorded in hours, minutes and seconds; including
production and testing. This time cannot be cleared.
®
to decrease the motor speed down to
) speed is set by using the Speed buttons.
settings, this will read
to increase the motor to
9