Accessories - Kärcher HD 4000 C Manual Del Usuario

HD 4000 C / HD 6000 C
Handguns with different spray lances
Dependent on the cleaning application,
different spray lance extensions are
required, ranging from 250 mm for one-
hand operation to 2040 mm for cleaning
high objects.
Spray lance with bypass valve
Featuring two spray patterns and operation
in conjunction with cleaning detergents,
length approx. 1000 mm.
Nozzles
Several nozzles with different spray angles
are available for the system. The nozzles
are mounted on the spray lance by means
of a union nut, and are easily changed.
Recommended nozzle size is size 07.
Designation Spraying
1507
2507
4007
Force of recoil from the handgun when
using these nozzles:
HD 4000 C 100 bar
HD 6000 C
The spraying device (i.e., handgun) is
connected by means of an in-line quick-
coupling.
5.956-648 A10369 (06/98)
H. Accessories
Order no.
angle 6.415-
15° -305
25° -287
40° -288
43 N
60 bar 25 N
System tap / workstation
Features injector for metering cleaning
detergent into pressure side, wall-mounted
container console and hose keeper, remote
release.
Hot-water accessory kit
This accessory kit permits an increase
of the water supply temperature to
a maximum of 80°C.
Cleaning detergents
Cleaning detergents facilitate any cleaning
task. A selection of cleaning agents is
listed in the table on the following page.
When using detergents it is essential to
observe the instructions supplied on the
product labels.
The following types of cleaning detergents
must not be used with this system:
•
Detergents containing nitric acid
•
Detergents containing active chlorine
Using these types of detergents will result
in damage to unit components.
English
H1