Technical Details - Royal Catering RCKC-6000 Manual De Uso

Ocultar thumbs Ver también para RCKC-6000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
II. TECHNICAL DETAILS
Model
1168 RCKC-6000 Kitchen Cutter 6000 ml
1167 RCKC-9000 Kitchen Cutter 9000 ml
1276 RCKC-12000 Kitchen Cutter 12000 ml
III. DESCRIPTION OF THE DEVICE
4
6
7
8
1.
Container
2.
Cover
3.
Arm lock
4.
Main body
5.
Feet
6.
Button board
7.
Knob for controlling speed
8.
clips to secure the container
ATTENTION: For better protection against vibrations the clips should be fastened to
the container during normal device operation.
10
Speed
Power
Power supply
1100-2800
950W
230V 50HZ
1100-2800
1200W
230V 50HZ
1100-2800
1200W
230V 50HZ
3
2
1
5
5
Rev. 19.09.2017
IV. USAGE PURPOSE
The kitchen cutter is intended for cutting, chopping, shredding (grinding) of meat,
fishes, raw and cooked vegetables.
Any damage resulting from a non-conform use of the device is pa-
yable by the user.
V. BEFORE FIRST USE
Checking packaging upon consignment.
Upon receipt of the goods, check the packaging for integrity and open it. If the pa-
ckaging is damaged, please contact your transport company and distributor within
3 days, and document the damages as detailed as possible. Do not turn the packed
goods upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
Disposing of packaging.
Please keep all packaging materials (cardboard, plastic tapes and styrofoam), so that
in case of a problem, the device can be sent back to the service centre in accurate
condition.
VI. INSTALLING THE CUTTER
The work surface where the RCKC-6000 Kitchen Cutter or RCKC-9000 Kitchen
Cutter will be located must be suitable for the size of the appliance. The work surface
must be level and dry and at a height of 80 cm from the ground with a temperature
between 5°C and 35°C.
It must be remembered that the mains parameters are the same as indicated on the
techplate.
Prior to use, thoroughly clean the device and equipment.
VII. OPERATION
Start-up:
Set the rotating speed via the knob for controlling speed.
Start up by pressing the button "I".
Stop by pressing the button "0".
Attention: The device can be filled with food only when the power is off. The knob
for controlling speed should be at "0" position.
Please note that this device can work continuously for maximum 3 minutes. Following
this time, the device may turn off by itself. In this case, please unplug the device. After
a 10 minutes break, the device can be plugged in again. Any food packed inside cannot
exceed 1/2 of the tank volume. Failure to comply can cause damage to the device.
Rev. 19.09.2017
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rckc-9000Rckc-12000

Tabla de contenido