Fitting Instructions - medi Shoulder sling Instrucciones De Uso

Deutsch
English
medi Shoulder sling
Intended purpose
The medi Shoulder sling is a shoulder joint support. The product is
exclusively to be used for the orthotic fitting of the shoulder and only
on intact skin or any wounds have been properly covered.
Indications
Post-intervention treatment and immobilization
Contraindications
None known at present.

Fitting instructions

• Undo the hook-and-loop fastener
• Place the arm with the injured shoulder in the bag. (picture 1)
• Place the two shoulder straps crosswise across your upper body and
place them over the shoulders. (picture 2)
• Take one of the two strap ends and attach it onto the bag at the front.
(picture 3)
• Do the same with the second strap.
• If necessary, or to attach it more firmly (especially at night), you can
also use the wide strap. Attach it to the back of the bag (at the elbow)
and wrap it around the stomach, then around the back. Your hand
should be left free to move. (picture 5).
Care instructions
Hook and loop fasteners should be closed for washing. Soap residues,
lotions and ointments can cause skin irritation and material wear.
• Wash the product by hand, preferably using a medi clean detergent,
or in delicate cycle at 30°C using a mild detergent without fabric
conditioners.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    