dirna Bergstrom bycool CAMPER Instrucciones De Montaje página 22

CAMPER
EN
b- Cut original hose from cold water tank and
14
insert "T" (Ø8 or Ø10 according to hose), to
connect to provided black hose.
c- Both hoses marked with tape go to "Y" of
tank return hose.
Use any original hole of chassis to fasten water
15
pump to lower part of vehicle, using silentblock,
washer and nut.
a- For passage of hoses and wiring towards
pump, drill a hole (outwards) according to
measures and then seal with silicone.
15
Inlet hose of pump must be placed at a downward
16
angle, fastening both hoses (inlet and outlet) with
(2) Ø10 clamps.
35
19
14
22
T
Original
15
®
15
16