ivory Silk Line Serie Instrucciones De Uso página 51

1) Press the locking button (1) and push the bur (2) in as far
as it will go. On blue and green contra-angle handpieces,
turn the bur until it locks in place.
2
2) Check that the bur (2) is held firmly in place.
2
1
3) Press the locking button (1) to release the bur (2).
2
DANGEr!
If you notice any unusual noise, vibration, overheating,
interruption in the flow of cooling liquid, leakage or
changes in the colour of the LED, stop using
CAUTION!
Always check that the cooling system is unobstructed be-
fore starting work.
1
49
Eng