Gima Sonoline C Manual Del Usuario página 37

37
2. After cleaning, sterilization and disinfecting, users must inspect whether
have any obvious damage which may affect the patient safety and instrument
performance.
WARNING: Never try to sterilize the probe or equipment by low temperature.
Chapter 8
SOLUTIONS FOR POSSIBLE PROBLEMS
If it appears below problems when you use the device, please solve them
as below:
Problems
Weak sound
Noise
Low
sensitivity
Possible reasons
• Volume is too low
• Power is low
• Did not daub the gel
• Probe is too near from
the main unt
• Disturbance from the
outside signal
• Power is low
• Position of the probe
is not correct
• Did not daub the gel
ENGLISH
Solutions
• Adjust the volume louder
• Change the battery
• Daub the gel
• Make the distane between
the probe and the main
unit a little further
• Keep far away from
the outside signal
• Change the battery
• Adjust the position
of the probe
• Daub the gel