Cembre MTE1-S Manual De Uso Y Mantenimiento página 5

Herramienta mecánica manual para la instalacion de los kits de conexion electrica
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. CONDUCTOR ASSEMBLY
– Insert the special bolt (with recessed head) through the copper bush. The screw thread should
protrude from the fl ange side of the bush; the recessed bolt head will tighten onto the web of
the rail and not onto the bush (Fig. 10).
– Crimp the lug onto the conductor. Assemble the lug to the fl ange of the bush over the protruding
bolt.
– Fit the fl at washer and the self-locking nut (Fig. 11).
5. WARNING
The tool is robust and requires very little daily maintenance.
Compliance with the following points should help to maintain the optimum performance of the tool.
5.1) Accurate cleaning
Dust, sand and dirt are a danger for any mechanical device.
Avoid putting the head on muddy or dusty ground.
Every day, after use, the head must be cleaned with a clean cloth, taking care to remove any residual
particles, especially around the moving parts.
5.2) Storage
(Ref. to Fig. 1)
When not in use, the tool should be stored and transported in the canvas bag, to prevent damage.
Canvas bag: "CVB-016" size 350x130 mm; weight 0,14 kg.
The bag will also store the "GO/NO GO" gauge and the two plungers.
6. PART LIST
(Ref. to Fig. 12)
Code N°
Item
6134045
01
RATCHET HANDLE
6371013
02
ADJUSTMENT LOCK RING
6900592
03
NUT
6402006
04
WASHER
6700253
05
CIRCLIP ø 38
6780143
06
SUPPORT
6040703
07
RING
6900625
08
SCREW
6460455
09
LEAD SCREW
6402009
10
THRUST WASHER
7. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
5
(Ref. to Figs. 10 and 11)
DESCRIPTION
Qty
The guarantee is void if parts used are not
1
Cembre original spares.
1
1
2
When ordering spare parts always specify the
1
following:
1
- code number of item
1
- name of item
1
- type of tool
1
1
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido